restricted in terms of your controller placement

Working together they allow you to manipulate the colour changing properties of your strip lights, offering various static and dynamic modes, with variable speeds and brightness's. Instead of infrared radiation, the controller relies on radio wave frequencies. The type you choose depends on the context and application of your strip lights. One of the main advantages offered by the IR Controller is that it does not require direct line of sight in order to work.Moreover, if you are using more than one set of LED tape you will be able to communicate with them all simultaneously off a single controller.

You will usually find that the red eye sensor is attached to length of wire, allowing you to position it for maximum effectiveness. This means the control box can be concealed in ceiling spaces or behind walls, making the entire setup a little more discrete. If you feel you are going to be restricted in terms of your controller placement or want a more inconspicuous setup, then an RF controller, despite its extra cost, will serve your purposes better. If you are using more than one set of LED Tape each will have to be controlled independently and you won't be able to synchronise them.

IR stands for infrared and refers to the means of communication between the remote and control box.The controller typically consists of two units; the control box and remote. Instead, you can operate the Tape so long as you are within proximity of the control box.RF stands for radio frequency. The remote features an infra red LED, which communicates with a corresponding red eye sensor on the control box. In order to work a direct line of sight between the remote and control box needs to White PTFE Tape be maintained. 

This allows you to synchronise more than one set of strips in order to create maximum effect. . To get started the control box needs to be wired up between the transformer and LED Tape.Due to their added functionality, RF controllers for LED Tape are generally more expensive, though not by much.The two main types of controller available are IR and RF.